Do you need a crane to install a hot tub?

Absolutely not! In fact, only around 5% of hot tub installations actually need the services of a crane. The rest can be maneuvered into place on the ground using a combination of spa dollies, sleds or sliders, and winches.

Can you lift a hot tub by hand?

Whatever you do, don't attempt to move a hot tub by yourself. The outdoor spa is simply too heavy for any one person to move alone.

Can you install a hot tub by yourself?

You should always call a general contractor if you are unsure about your ability to complete any step of this installation. Though relatively easy to install, hot tubs require plenty of preparation. Any electrical work should be done by a licensed electrician.

Do I need a crane to install a swim spa?

Most of the time, a crane is required to install a Swim Spa into your backyard. This is a very routine process and we do it on a weekly basis. A typical crane rental is between $500 and $1500, depending on how far we need to move the Swim Spa or Hot Tub.

How many people can lift a hot tub?

Moving help: You will need at least four friends or helpers to move the hot tub. Consider that each side will need a lifter and one person will need to slide the hot tub onto the dollies.

Hiab vs crane - What’s the difference and do I need one for my spa delivery?

Can you Crane a swim spa over a house?

Crane Truck: With varying reach, this method can be used to deliver spas over a fence or straight into position and is safe, easy and relatively cheap. Large Crane: While more expensive, this option would be required if the spa bath needs to be delivered long distances such as over your house.

Do I need a concrete slab for a hot tub?

A hot tub requires a stable surface — whether it's a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel. There's also the option to have the hot tub installed in the ground but that still requires a concrete vault.

Can you plug a hot tub into a regular outlet?

As long as you have access to a regular three-pronged electrical outlet, you can plug in your hot tub and have it up and running within 24 hours. That said, not all hot tubs feature this option. Hardwired hot tubs require the services of a certified electrician to connect the electricity.

Are hot tubs expensive to maintain?

The basic level of hot tub water care (using bottled chemicals) costs around $20 per month to maintain your hot tub, however this depends on what water system that you choose. Upgrading your water care system may be initially more expensive but will save you money and maintenance time in the future.

What kind of power supply do I need for a hot tub?

Most hot tubs require a 240v electrical hookup—which for most people means you have to call an electrician and have new wiring done. However, a Plug n' play spa runs on standard 110V power, which can be plugged into most standard household power sources without the need for additional wiring.

What is the best base to put a hot tub on?

A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it's in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.

What electrical is needed for a hot tub?

What are the Electrical Requirements for hot tub installation? Hot tubs either require 110V or 220V of electricity. If you choose a 110V model— often referred to as “plug-and-play”—then you may be able to simply plug the spa into an electrical outlet in the backyard.

How heavy is an empty hot tub?

In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.

How heavy is a 4 person hot tub?

Its dry weight is 350 and it holds 220 gallons of water. Altogether, this puts the weight for a 4-person hot tub at around 2,184lbs.

Can I use an extension cord for my hot tub?

You can use an extension cord with a hot tub if you can secure an extension cord with a gauge of 12 or greater, weatherproof sockets, and GFCI protection. Doing so can reduce some of the risks associated with the use of extension cords. Hot tubs are hardwired into a home's electrical system.

Can I put a hot tub on my patio?

Outdoor hot tub placement, such as decks, concrete or brick patios, is common. However, the hot tub can be placed on any solid, uniform, level surface. Do not place your hot tub on grass or bare ground.

Do you need 220 for a hot tub?

Most acrylic hot tubs require a 50-amp 220V electrical connection. These dedicated hook-ups require a licensed electrician for installation. Often called plug and play hot tubs, there are models that require a 15-amp 110V connection.

How close to the house can a hot tub be?

Proximity to the house. To reduce the risk of electrocution, place your tub at least 16 feet away from overhead power lines. To protect your home and outbuildings from potential flooding, keep it at least 5 feet from any structure.

Is it OK to put a hot tub on pavers?

Sitting a Hot Tub on Pavers

If using pavers, select ones that are smooth and can be interlocked at a level height to create a solid, flat layer on top of a concrete base. If you do not want to install a concrete slab underneath the pavers, sand or gravel will be needed to properly support the weight of the hot tub.

Can I put a hot tub on grass?

Can a hot tub go on grass? A hot tub CANNOT sit directly on grass or earth. A hot tub holds too much weight to sit on grass. It will inevitably sink, the environment beneath the hot tub will be wet and untidy and it could lead to rot if you have a wooden framed spa.

Can you lift a hot tub over a fence?

If we just need to lift the hot tub over a fence or bush/trees and can park a vehicle on the other side, then a HIAB crane may be just the trick. This is a truck with a small crane on the back, and can be considerably more cost effective than a full size crane.

How do you jack up a hot tub?

To lift the spa, position the jack under the ledge and pump the handle until the spa is lifted just enough to slide your cover lifter plates under. You can always place a some pieces of 2x4 wood as shims between the jack and the ledge for extra height if you need to.

Can you put a hot tub on a high deck?

A hot tub on a deck is entirely possible, and it is possible your deck is already equipped to handle one. A deck designed to hold at least 100 pounds per square foot will support nearly any type of hot tub.
Previous question
Do hamsters stink up your room?