What is the most durable finish for hardwood floors?

Polyurethane is actually the most durable hardwood floor finish.

What is the most scratch resistant wood finish?

Most Durable Hardwood Floor Finish: Aluminum Oxide

Aluminum oxide is the finish you buy when you don't want to deal with it at all. It comes already installed on the best prefinished hardwood flooring. Rated to last up to 25 years in a single application, it makes the surface much less likely to scratch or fade.

Is water based polyurethane better than oil?

Durability of Water Based vs Oil Based Polyurethane

Today though, water based polyurethane has evolved with better formulations that are equally durable as oil based polyurethane. High quality water based polyurethanes is considered by many homeowners & flooring professionals to be equally durable.


What is the most popular finish for hardwood floors?

Polyurethanes. The most popular surface finishes are oil-based and water-based polyurethanes. Water-based polyurethane, which can be applied relatively easily, dries quickly (12 hours), has low odor and low volatile organic compound (VOC) emission, and maintains a clear, smooth, shiny finish.

What is the toughest floor varnish?

This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained.


Comparing durability of 12 hardwood floor finishes for refinishing



Which is better varnish or polyurethane?

However, when applying a finish to your interior hardwood floor, polyurethane is the better option. While varnish provides value in its protection against ultraviolet light and natural durability, it is specifically designed for outdoor surfaces.

What is better lacquer or polyurethane?

Despite being available in variances, polyurethane is more durable. It is thick and leaves a strong coating. Lacquer is thin and penetrates the wood surface. It is also durable but susceptible to scratches and discoloration after some time.

Is high gloss polyurethane more durable than satin?

Since all polyurethane finishes share the same formula, satin and semi-gloss are all equally durable. However, the more sheen a finish has, the more it will show damage over time. In other words, satin does a better job hiding dirt, dust, and imperfections.

Is semi-gloss or high gloss better for hardwood floors?

Since high gloss is not the best option for high traffic areas in your home, a low gloss finish might be a better choice for those areas. If you want a slighter appearance of high gloss though, and still want a hardwood finish that will last a long time, semi-gloss is your best option.


Which is better matte or satin floor finish?

The gloss of a satin finish disperses light and more easily conceals dirt, dust, and pet hair. Gleaming satin floors will also maintain their new appearance longer than other types of finishes. A matte finish, on the other hand, works well to hide imperfections such as scuffs, dents, or scratches.

What is the most durable polyurethane?

Dura-Seal Polyurethane – Inexpensive and Durable

Dura-Seal is a well-known brand for finishing floors. This polyurethane is one of the most durable options you can possibly find on the market. The product gets pretty good coverage, with one gallon providing up to 500 square feet.

What is the downside of oil based polyurethane?

Cons of Oil-Based Polyurethane

Longer dry times. Dents easier due to it softer finish. The odor is unbearable (respirator use is recommended). The floor darkens over time.

What is the main disadvantage of using water based polyurethane?

Cons. Water-based polys cost twice as much as oil-based polys. They won't give wood the rich glow that oil-based polys impart; some even consider them cold looking. Some waterborne polys go on so clear that you'll have to mark each swath of finish as you go.


What hardwood floor scratches the least?

Selecting a floor such as Hickory, Hard Maple or White Oak can protect your floor from damage, as these hardwoods are less susceptible to scratches than softer woods like Pine, Cherry or Black Walnut. Hardwoods with more dramatic grain patterns can help to hide scratches more easily.

Is there scratch proof hardwood?

There is no such thing as "scratch proof wood flooring", however, choosing a lower gloss will definitely get you a wood floor that appears scratch resistant.

Is shellac more durable than polyurethane?

As explained above, polyurethane is a curing finish. It hardens in two phases, creating an extra-strong and durable protective layer over wood. Shellac is non-curing. Once it dries, it is as hard as it will ever get.

Is semi-gloss more durable than satin?

What about semi-gloss paint? Semi-gloss is almost the same, but has more reflective qualities than satin paint, and can be slightly more durable. In general, the glossier the paint, the more durable it is, although some paints are designed specifically to be very durable, regardless of sheen.


What shine is best for hardwood floors?

The 9 Best Hardwood Floor Polish in the US
  • TriNova Hardwood Floor Polish and Restorer. ...
  • Quick Shine High Traffic Hardwood Floor Luster and Polish. ...
  • Weiman Eco-friendly Wood Floor Polish. ...
  • Rejuvenate Professional Wood Floor Restorer. ...
  • Murphy Oil Soap Wood Cleaner. ...
  • Minwax Hardwood Floor Reviver.


Is satin or gloss better for wood?

Like satin paint, satin polyurethane is better as disguising imperfections. If you have a wood floor that's seen better days, satin is likely your best choice. However, gloss can still work for floors. It can be overwhelming in large spaces or when there's a lot of light.

Is two coats of polyurethane enough on hardwood floors?

We recommend at least 2 coats of oil based polyurethane + a lacquer sealer coat as a minimum for hardwood flooring. Extra coats = extra protection, but only one coat of oil based polyurethane may be applied per day, as it needs 24 hours to dry before applying another coat.

How do I pick the right polyurethane?

Choose whichever sheen you like best; there's no difference in durability. Just remember that the glossier the finish, the more it will show any underlying imperfections and any future wear and tear.


Which is better semi-gloss or satin floors?

In terms of actual durability, they are technically the same. In terms of practicality though, Satin ends up lasting or looking better for a longer period of time than semi-gloss does. The reason for that is that the shinier you go, the more it shows the dents and scratches, as well as the dirt.

Is lacquer as durable as polyurethane?

No, lacquer and polyurethane are not the same. Polyurethane is more like a protective plastic that coats wood surfaces, while lacquer behaves like water as it penetrates the wood. Lacquer is thin and dries quickly but is not as durable as polyurethane and isn't recommended for highly trafficked areas.

Does lacquer scratch easily?

Although lacquer may be a durable finish, it is vulnerable to chips, scratches and wear.

What's the difference between polyurethane and urethane?

Urethane is flexible and malleable, making it ideal for objects that have different shapes and forms, and it is used in liquid form. Polyurethane, on the other hand, is stiff and rigid and is ideal for firmer items, with many advantages over natural rubber.
Previous question
Do sharks eat dead bodies?