Which lights should you turn on at night while driving?

Contents. High beam headlights should be used at night, whenever you're unable to see enough of the road ahead to drive safely. Low visibility at night can be scary for even the most experienced drivers.

When should you use your headlights at night?

The law says you must turn your headlights on 30 minutes after sunset and leave them on until 30 minutes before sunrise. You must turn your lights on any time you can't see at least 1000 feet ahead. Use your low beam headlights whenever it is raining.

When should my lights be on while driving?

While the specific laws vary by state, you will need your headlights during the day if: Visibility is low because of bad driving weather conditions like fog, rain, or snow. You're driving through a narrow mountain pass. You're on winding roads.


Do you turn on headlights at night?

Also remember that you are legally required to turn on your headlights between 30 min before sunset and 30 min after sunrise. While it's more pertinent to use your lights at nighttime, there's no problem with using them during the day if the conditions are poor enough.

Do you use low beams at night?

Low beams are essential when driving at night, but they have also been proved to improve visibility and safety when used during the day, for example during adverse weather (rain, snow, sleet or fog) or just after sunrise and just before sunset.


Which Car lights to use at night



When should I turn my high beams on?

When you cannot see farther than 200 feet using low-beams, you should switch to high-beams, unless:
  • Another vehicle is within 200 feet and approaching you from the opposite direction.
  • You are less than 200 feet behind another vehicle.
  • Heavy rain, fog, or snow are present.


When should you switch to low beams?

Be sure you are driving slow enough to stop or turn if needed. Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet. Slow down when nearing a curve if you are driving the maximum posted speed limit.

How can I drive in the dark without headlights?

California Vehicle Code 24250 makes it unlawful in California for motorists to drive in the dark without headlights. The section states: During darkness, a vehicle shall be equipped with lighted lighting equipment as required for the vehicle by this chapter.

What are the low beams?

Low beams are the 'normal' lights your car headlights emit and are used when driving at night or in a dim or dark setting such an indoor parking lot. Low beams have a short-range focus and are sometimes referred to as 'dipped beam'. Low beams are the most important and most frequently beam used in a car.


Do you use high beams at night?

High beam headlights should be used at night, whenever you're unable to see enough of the road ahead to drive safely. Low visibility at night can be scary for even the most experienced drivers.

When a car behind you have their high beams on day or night you should?

If an approaching car is using its high-beams, don't look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on.

What are the different headlights on a car?

The four most common types of car headlights are halogen, LED, Xenon/HID, and laser.

How do people drive in the dark?

Own the Night: 10 Tips for Driving After Dark
  1. Aim Your Headlights. Caspar Benson/Getty Images. ...
  2. Dim Your Instrument Panel and Dash Lights. ...
  3. Don't Wear the Wrong Glasses. ...
  4. Become a Retina Spotter. ...
  5. Don't Stare at Oncoming Lights. ...
  6. Give Your Windshield a Wipe With Newspaper. ...
  7. Bolt on Some Fog Lights. ...
  8. Add Auxiliary Lights—Cautiously.


Why can't some people drive at night?

Night blindness (nyctalopia)

Like presbyopia and myopia, night blindness can pose a dangerous threat to driving at night because it limits the visual capabilities of an affected driver. This disorder can be caused by cataracts, glaucoma, myopia and other vision conditions.

Can I drive with no lights?

Generally, it's considered legal to drive at night without headlights on roads where the street lights are less than 200 yards (roughly 180 metres) apart, and the speed limit is under 48km/h. This doesn't mean that you can't have your headlights on, it's just not required.

What is difference between high beam and low beam?

Low beams are lower intensity and reach a shorter distance in front of your car. High beams are high intensity and light a greater distance.

How can you tell if your lights are on high beam or low beam?

High beams are distinguished from low beams by their brighter light. They are sometimes referred to as “main beam” headlights. These terms are synonymous, and the term used depends entirely on the region. High beams point straight ahead, while low beams are angled down towards the road.


How do you use high beam lights?

The very simple way of turning the high beam on is to push the blinker lever away from you. While pushing away the lever, you must feel the click to be sure that the high beams are turned on. As soon as you feel the click, your car's high beams are turned on.

What should you do if an oncoming driver fails to use low beam headlights?

If an oncoming driver fails to use the low beam headlights after you switch to your low beam headlights, you should slow down and glance at the right edge of the roadway. If the oncoming driver at night fails to use the low beam headlights, you can attempt to reduce glare by frequently looking ahead with quick glances.

Is it OK to drive with high beams?

Are Bright Lights Illegal? Bright lights are not illegal according to traffic law or accident law. Motorists navigating dark areas are advised to use their high beams to ensure their safety. In most cases, the vehicle's high beams are located near the grill in the front of the car's center.

Why would you just flash your high beam lights?

However, most official state driving manuals recommend flashing your headlights only to notify other drivers that their high-beams are on as they approach you from the opposite direction. Leaving your high-beams on can temporarily blind other drivers and cause a collision.


What are the 3 headlights?

There are three main types of headlights: LED, HID or 'xenon', and halogen. We're going to take you through the features of all three, so you have all the information you need to make the best decision for your car.

Which headlight is which?

The H4, H13, H13A, H14, and H15 are double-filament headlight bulbs that are used in small cars. The H1, H3, HB4, and H7 bulbs are smaller, more powerful halogen bulbs, while the H8, H9 and H11 are self-sealing bulbs that don't have to sit inside a watertight unit, so they're often used as fog lights.

What lights to use in fog?

Don't use high-beam headlights. They won't shine through the fog but just reflect the light back in your eyes, making it worse for you and other drivers. Use low-beams. In really dense fog, use front fog lights in addition to your low-beams if you have them.
Previous question
Is there sugar in pesto?
Next question
What foods make your face fat?