Which of the following network device is used to connect the two network working on different protocols?

Gateway – A gateway, as the name suggests, is a passage to connect two networks together that may work upon different networking models. They basically work as the messenger agents that take data from one system, interpret it, and transfer it to another system.

Which device is used to connect one network with another network that uses different protocols?

Gateway. Gateway is a network device used to connect two or more dissimilar networks. In networking parlance, networks that use different protocols are dissimilar networks. A gateway usually is a computer with multiple NICs connected to different networks.

Which of the following is used to connect two networks with different protocols?

Answer. Answer: Bridges: A bridge is a type of computer network device that provides interconnection with other networks that use the same protocol, connecting two different networks together and providing communication between them.


Which networking device is used to connect two different networks?

Routers are general-purpose devices that interconnect two or more heterogeneous networks. They are usually dedicated to special-purpose computers, with separate input and output network interfaces for each connected network.

Which device is used to connect two systems of the systems use different protocols?

Gateway device is used to connect two system, especially if the system use different protocols. Unlike less advanced network hubs, a network switch forwards data only to one or multiple devices that need to receive it, rather than broadcasting the same data out of each of its ports. It works on OSI layer 2.


Connecting Two Networks Running Different Routing Protocols



How do I connect two different networks?

Connect the "LAN" port to the "network 1" network and give it a static IP address in the "network 1" subnet. Disable any DHCP server on the router. Connect the router's "Internet" port to the "network 2" network and give it a static IP address in the "network 2" subnet.

Can switch connect two different networks?

, Cyber Security Consultant with Polito, Inc. NETWORKING BASICS: TWO SUBNETS CANNOT TALK TO EACH OTHER UNLESS THEY'RE BOTH CONNECTED TO A ROUTER (OR A DEVICE HAVING ROUTING FUNCTIONALITIES, E.G. A LAYER 3 SWITCH). ONLY ROUTERS CONNECT TWO DIFFERENT SUBNETS, SWITCHES DON'T.

Which cable is used to connect two different data communications?

An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers (via their network interface controllers) or two switches to each other.

Which network device is used to connect two network segments on the data link layer?

Bridge: a device that connects multiple network segments along the data link layer.


Which cable is used to connect two different data communications Mcq?

Ethernet cable comprises of a Cat - 5 twisted pair of coaxial cable with a connector called RJ - 45 (registered jack 45). The connector is a 48-bit mac address network interface card that helps to identify the devices and communicate with them.

What cable is used to connect two computers?

Ethernet cabling is the fastest way of connecting PCs together. Whether it is your router or the central switch, Ethernet cabling or a crossover cable provides you the fastest way to connect. With it, you can connect two computers without having to access a network or without setting up an ad hoc network.

Which of the following can be used to connect two computers?

You can connect two Mac or PC computers using an ethernet cable to share files or internet access between the two computers. You can also share files between computers using either an ethernet connection or Wi-Fi.

What is a router and a switch?

Router and Switch are both network connecting devices. Router works at network layer and is responsibe to find the shortest path for a packet whereas Switch connects various devices in a network. Router connects devices across multiple networks. Following are the important differences between Router and Switch.


How do I connect two network interfaces on a different subnet?

How to Connect Computers That Are on 2 Different Subnets
  1. Connect the computers to the network. ...
  2. Connect the routers to each other. ...
  3. Enable a routing protocol in each subnet's router. ...
  4. Allow time for the routing tables to update.


What is a router used for?

A router is a device that connects two or more packet-switched networks or subnetworks. It serves two primary functions: managing traffic between these networks by forwarding data packets to their intended IP addresses, and allowing multiple devices to use the same Internet connection.

How do you connect two protocols?

When we use different Networks of different technologies we can connect them by using interface i.e. GATEWAYS. But if there are two systems on the same network and using different protocols, and we want to connect them we use interface BRIDGE. There the right answer is bridge.

Which among the following connects two more networks?

A router is a hardware device that connects two or more networks. Routers are the primary backbone device of the Internet, connecting different network technologies into a seamless whole.


Who connects two devices together?

The correct answer is the hub. An Ethernet hub, active hub, network hub, repeater hub, multiport repeater, or simply hub is a network hardware device for connecting multiple Ethernet devices together and making them act as a single network segment.

Which of the following is used to connect your computer with other computers?

Notes: Straight-Through cable is also referred to as a “patch cable.” Straight-through cable is used to connect computers and other end user devices to networking devices such as hubs & switches.

Which of the following is a device that joins the cable to the computer in a network?

Network Interface Card (NIC) or LAN Card:

A network interface card is a device that joins a cable to computer. Most network interface cards are installed inside a computer.

Which connector is used for connecting cable to networking devices?

Ethernet Cable Connectors

RJ45 connectors are used for CAT6 cables and CAT5e cables. These connectors for twisted-pair Ethernet cables are similar in appearance to a standard telephone cord connector. They are wider, however, because they have eight conductors compared to only four conductors on a telephone jack.


What is the use of bridge in network?

A bridge is a network device that connects multiple LANs (local area networks) together to form a larger LAN. The process of aggregating networks is called network bridging. A bridge connects the different components so that they appear as parts of a single network.

What is crossover cable used for?

Crossover cables These are used to connect two computers or similar devices directly together, such as computers or hubs. To create a crossover cable is to rearrange the wires on one end of a standard Ethernet cable, so that they are in the following order (starting at pin 1): 1.
Previous question
Who is the skunk on Masked Singer?